Brocade Communications Systems Fabric OS v6.4, Обновление документации

Страница: 17 / 70

Fabric OS Documentation Updates 5
53-1002063-09
Documentation updates for Fabric OS v6.4.1
2
Chapter 9, Configuring QoS using the CEE CLI
Under the heading of "Creating a CEE map" on page 109, add the following note:
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Under the heading of "Creating a CEE map" on page 109, delete the example under step 2.
Under the heading of "Defining a priority group table" on page 109, add the following note:
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Under the heading of "Defining a priority group table" on page 109, delete the example under step
4.
Under the heading of "Defining a priority-table map" on page 110, add the following note:
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Under the heading of "Defining a priority-table map" on page 110, delete the example under step 3.
Under the heading of "Applying a CEE provisioning map to an interface” on page 112, delete the
example under step 3.