Brocade Communications Systems Brocade TurboIron 24 Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 78

Brocade Communications Systems Brocade TurboIron 24 Series Скачать руководство пользователя страница 21

Brocade TurboIron 24X Series Hardware Installation Guide

21

Part Number: 53-1003053-03

Installing the TurboIron 24X

Installation precautions

Make sure that air flow around the front, sides, and back of the device is not restricted.

Never leave tools inside the device.

Use the erase startup-config command only for new systems. If you enter this command on a system you
have already configured, the command erases the configuration. If you accidentally do erase the
configuration on a configured system, enter the write memory command to save the running configuration
to the startupconfig file.

Changes or modifications made to this device that are not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

All fiber-optic interfaces use Class 1 lasers.

Lifting precautions

Make sure the rack or cabinet housing the device is adequately secured to prevent it from becoming
unstable or falling over.

Do not use the handles on the power supply units to lift or carry a Brocade device.

Mount the devices you install in a rack or cabinet as low as possible. Place the heaviest device at the
bottom and progressively place lighter devices above.

Power precautions

The following precautions apply to TurboIron 24X devices:

«
...
19
20
21
22
23
...
»

Содержание Brocade TurboIron 24 Series















































































Отзывы:

Нет отзывов