Brocade Communications Systems Brocade TurboIron 24 Series, Руководство по установке оборудования, Страница: 14 / 78

14 Brocade TurboIron 24X Series Hardware Installation Guide
Part Number: 53-1003053-03
Product Overview
Hardware features
Figure 1 shows the TurboIron 24X.
FIGURE 1 TurboIron 24X
TurboIron 24X contains the following ports:
•
Twenty-four (24) SFP+ 10 Gigabit and Gigabit Ethernet fiber ports
•
Four (4) 10/100/1000 Mbps copper ports, supporting 100Base-TX and 1000Base-T RJ-45 connectors
Control features
TurboIron 24X front panel has the following control features:
•
Serial management interface-DB-9 connector interface (Console Port)
•
10/100/1000 RJ-45 Management Port
FIGURE 2 Console and management ports
Serial management interface (Console port)
The serial management interface (port labeled Console) enables you to configure and manage the device using a third-party terminal
emulation application on a directly-connected PC, straight-through EIA or TIA DB-9 serial cable (M/F) is included. The console port is
located in the upper right of the front panel.
Management port
The Management port provides connectivity to your existing management network through 10/100/1000 copper ports that uses
auto-sensing and auto-negotiating to determine the speed (10 Mbps, 100 Mbps, or 1000 Mbps) and mode (full-duplex or half-duplex)
of the port at the other end of the link, and adjusts port speed accordingly. The Management port on the TurboIron 24X supports RJ-45
copper connectors, auto MDI or MDIX detection, and has an RJ-45 unshielded twisted pair (UTP) connector.
NOTE
This port interfaces with the CPU only and not the data plane.
1 Management Port 2 Console Port
A
1 2