23
Section D – Electrical Components
Remove control panel assembly (see Control Panel
4.
Assembly, Remove and Re-install).
SCREWS
NOTCH
NOTCH
To remove the bag storage, remove four Phillips head
5.
screws that secure it to the cabinet. NOTE: Upon
reassembly, the notches on the right and left sides
must appear on the lower part of the bag storage.
SCREWS
Remove six Phillips head screws each that secure the
6.
front and rear of the stabilizer plates to the cabinet
cover (rear view shown).
GROMMET
To remove the power cord at the back of the unit,
7.
rotate the power cord grommet 90º to the right, then
slide the cord out of the slot. Temporarily place the
cord in the rear of the power unit assembly to keep it
out of the way.