22
Section D – Electrical Components
Start Switch
REMOvE AND REPLACE
The start switch is located inside of the cabinet, behind
the push button assembly.
Remove control panel assembly (see Control Panel
1.
Assembly, Remove and Re-install).
Remove start switch (2 screws).
2.
SCREWS
Installation is the reverse of removal.
3.
Access to Components
In order to access the electrical components, it is first
necessary to remove the cabinet cover.
REMOvE CABINET COvER
Remove the bucket from the compactor (see
1.
Cabinet
,
Trash Bucket).
Remove the door assembly, the (2) bottom door
2.
gasket retainers (see
Cabinet
, Door Assembly).
Remove the back panel by first removing the Phillips
3.
head screw that secures the power cord cable clamp
to the back panel, and then removing the 16 screws
that secure the panel to the cabinet.
SCREWS
BAG
STORAGE
SCREWS
CONTROL
PANEL
BACK
PANEL
SCREWS
SCREW
CABLE
CLAMP
SCREWS
