Broan BCS3 Series, Инструкции по установке и эксплуатации

Страница: 11 / 14

11
10. CLEANING AND MAINTENANCE
Grease Filters
The grease filters should be cleaned frequently. Use a warm detergent solution. Grease filters are
dishwasher safe.
Remove filters by pushing them towards the back of hood and tilting them downward.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the
filters may occur if using phosphate detergent or as a result of local water conditions—but this will
not affect filter performance. This discoloration is not covered by the warranty.
Hood cleaning
Stainless steel cleaning:
Avoid when choosing a detergent:
- Any cleaners that contain bleach will attack stainless steel.
- Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.
- Any combustible products used for cleaning such as acetone, alcohol, ether, benzol , etc., are
highly explosive and should never be used close to a range.
Enamel finish:
Clean with warm water and mild detergent only. If discoloration occurs, use a good enamel polish
such as automotive polish. (DO NOT use rough abrasive cleaner or porcelain cleaner.)
Do:
• Regularly wash with clean cloth or rag
soaked with warm water and mild soap or
liquid dish detergent.
• Always clean in the direction of original
polish lines.
• Always rinse well with clear water (2 or 3
times) after cleaning. Wipe dry completely.
• You may also use a specialized household
stainless steel cleaner.
Don’t:
• Use any steel or stainless steel wool or any
other scrapers to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction
residues reach the hood. During
construction/renovation, cover the hood to
make sure no dust sticks to stainless steel
surface.
Fan Blade
The fan blade should be cleaned frequently. Use a clean cloth soaked with warm detergent solution.
Motor
The motor is permanently lubricated and never needs oiling. If the motor bearings make excessive or
unusual noise, replace the motor with the exact service motor. The fan blade should also be replaced.
Non-Ducted Recirculation Filters
The non-ducted recirculation filter should be changed every 6 months. Replace more often if your
cooking style generates extra grease, such as frying and wok cooking. Refer to installation instructions
included with non-ducted recirculation filters.