18. REINSTALL FILTER
1.
Rest rear filter edge on filter springs (
A
) in the power
pack.
2.
Using the finger cup, tilt up the filter into position. Make
sure filter tabs (
B
) are securely engaged in power pack
front edge after installation.
CAUTION
Remove protective plastic film covering filter before installing it.
HD0
3
6
3
19. LIGHT BULBS
This power pack must use shielded halogen lamps (120 V, 50 W, MR16 or PAR16 with GU10 base), included.
1.
Install the lamps by placing the bulb leads into their grooves in the socket.
2.
Gently push upwards and turn clockwise until secure.
To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
WARNING
In order to prevent the risk of personal injury, do not install a lamp
identified for use only in enclosed fixtures.
!
WARNING
In order to prevent the risk of personal injury, the halogen lamps must
be cooled down before removing them.
!
1
2
HO0090
A
B
20. USE AND CARE
Filter
The filter should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates more
grease — like frying foods or wok cooking.
Remove filter by pushing it towards the back of hood and rotating filter downward. Filter is dishwasher safe. Allow filter to dry
completely before reinstalling them in the power pack.
Clean all-metal filter in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using
phosphate detergent or as a result of local water conditions — but this will not affect filter performance. This discoloration is not
covered by the warranty.
Blower(s) Cleaning
Remove the filter in order to access the blower(s). Vacuum blower(s) to clean. Do not immerse in water.
Power Pack Cleaning
Stainless steel cleaning:
Do:
• Regularly wash with clean cloth or rag soaked with warm
water and mild soap or liquid dish detergent.
• Always clean in the direction of original polish lines.
• Always rinse well with clear water (2 or 3 times) after
cleaning. Wipe dry completely.
• You may also use a specialized household stainless steel
cleaner.
Don’t:
• Use any steel or stainless steel wool or any other scrapers
to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction residues reach
the power pack During construction/renovation, cover the
hood to make sure no dust sticks to stainless steel surface.
- 10 -
