- 7 -
11. REMOVE THE KNOCK-OUT OPENING
Remove the knockout
opening on top (vertical
discharge installation) or on
back (horizontal discharge
installation) of the power
pack.
1
2
HR00
3
6
Using two (2) no. 8 x 3/8’’ screws provided in parts bag, secure the adapter to the top of the power pack. Remove tape from
damper flap. Seal the adapter to the power pack using metal foil duct tape.
HO01
3
6
12. INSTALL THE ADAPTER/DAMPER
V
ERTICAL
E
XHAUST
I
NSTALLATION
The adapter/damper will be installed on the back of the power pack once the power pack will be mounted in the custom hood.
Refer to step 15.
H
ORIZONTAL
E
XHAUST
I
NSTALLATION
Punch out the electrical knockout hole on top (
B
) OR in
front (
C
) of the power pack. Install the wire clamp (included
in parts bag).
10. REMOVE THE ELECTRICAL KNOCK-OUT
Punch out the electrical knockout hole on back (
A
) OR
on top (
B
), right side of the power pack. Install the wire
clamp (included in parts bag).
HR00
3
5
A
B
B
C
S
INGLE
B
LOWER
U
NIT
D
UAL
B
LOWER
U
NIT
D
UAL
B
LOWER
U
NIT
S
INGLE
B
LOWER
U
NIT
