53-1004105-13 Hardware Installation Guide
Brocade X6-8 Director
Hardware Installation Guide
Table 15: Core Routing Blade LED Descriptions
LED Purpose
Color
Status
Recommended Action
Steady green
The blade is on.
No action is required.
Power
No light (LED is off)
The blade is not on.
Ensure that the blade is firmly
seated and has power.
No light (LED is off)
The blade is either healthy or does
not have power.
Verify that the power LED is on.
Steady amber
The blade is faulty, or the switch is
still booting.
Ensure that the blade is firmly
seated and the switch has
completed booting. If the LED
remains amber, consult the supplier
for your Brocade device.
Slow-flashing amber (on 2 seconds,
then off 2 seconds)
The blade is not seated correctly or
is faulty.
Pull out the blade and reseat it. If
the LED continues to flash, replace
the blade.
Status
Fast-flashing amber (on 1/2 second,
then off 1/2 second)
The environmental range has been
exceeded.
Check for out-of-bounds
environmental conditions, and
correct them.
No light (LED is off)
No QSFP module is seated, or all
four QSFP ports are disabled.
No action is needed if the QSFP
is not installed. If the QSFP is
installed, verify that it is fully
inserted.
Steady amber
The QSFP module is in, but all four
ports have not yet come online.
Ensure that the cable is properly
connected. If the LED remains
amber, consult the supplier for your
Brocade device.
Blinking amber
The port is faulted, or the port is in
transition between cable plugin and
all four ports online.
Check for console messages, or
wait for all four ports to come online.
QSFP port status
LED
Steady green
The QSFP module is in, and all
ports are online.
No action is needed.
Interpreting Control Processor Blade LEDs
See the following figure and table to interpret the LED patterns on the CPX6 blade. The LED patterns may temporarily
change during POST and other diagnostic tests.
53-1004105-13
77
Broadcom
Содержание Brocade X6-8 Director
Страница 207: ......
