Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
-w
Wait for firmware signature
10.167 quit
cmd:
quit
Description:
Exit System
Syntax:
quit
10.168 smbus
cmd:
smbus
Description:
ASF terminal. Run this command to access SMBus, the parameter a1 and a2
are one byte value to specify the NIC SMBus Addresses. It sets to 0 by default.
Syntax:
smbus [a1 a2]
Options:
-s Run in slave mode
10.169 cls
cmd:
cls
Description:
Clear Screen.
Syntax:
cls
10.170 loop
cmd:
loop
Description:
loop on command.
Syntax:
loop [iteration] <cmd> [<parameter> ...]
10.171 dbmode
cmd:
dbmode
Description:
Set DEBUG Mode to On or Off Mode.
Syntax:
dbmode on|off
page 123
Broadcom Confidential and Proprietary
