Safety
B115 06/16 Rev.2
ZIRKON D060 D – D140 D
9
3.7
Improper operation
Mis-usage can result from the following methods of operation:
No dangerous substances may be sucked into the machine such, for
example, as:
°
combustible or explosive gases or fumes,
° steam,
° aggressive
gasses.
The use of the machine in non-industrial establishments, in which the
necessary precautions and safety measures have not been undertaken.
The installation in explosion-prone environments.
Alterations to the machinery and its component accessories.
3.8
Protective measures by the operator/user
The machine is operated in commercial/industrial situations. The operator of
the machine is, therefore, subject to the legal requirements in respect of
working safety. In addition to the safety regulations stated in this operating
manual, the applicable safety-, accident- and environmental protection
regulations must be adhered to for operation of this machinery.
In this regard, it should be specially noted that:
Hot parts of the machine must not be accessible or be provided with
protective contact means.
Personnel should not be placed in danger from free suction or expulsion
of medium substances.
Danger from electrical energy should be prevented.
The operator must be conversant with the relevant protection-at-work
regulations and must ascertain any situation judged to comprise
dangerous conditions when the work-place of the machinery will have
special safety regulations. These should be available to him as operating
instructions for using the machinery.
The operator must undertake tests throughout the operation of the
machinery to check whether the operating instruction being followed by
him actually conform to the prescribed instructions for operating the
machinery and, if necessary, modify accordingly.
The operator must clearly regulate and establish the adequacy of the
installation, operation, fault removal and maintenance.
The operator must ensure that all co-workers involved in operation of the
machinery have read and understand these operating instructions. In
addition, he must subject the personnel to training sessions at regular
intervals and keep them informed about dangers.
DANGER!
Safe access to the operating components!
If operating components are displaced and unreachable, there is the risk of
injury and life-threatening injury.
Operating components should not be displaced and safe access should be
available.
In addition, the operator is responsible for ensuring that the machinery is
permanently in a faultless technical condition.
