Transport storage
B115 06/16 Rev.2
ZIRKON D060 D – D140 D
13
6
Transport storage
6.1
Safety instructions for transport
DANGER!
Danger from suspended loads!
Danger of injury and injury leading to fatal injury from falling loads!
Do not stop under swaying loads
Maintain sufficient distance from swaying loads
Be mindful of the centre of gravity
Observe the accident
When lifting and transporting the machinery be aware of the technical safety
prevention regulations!
regulations and the general accident prevention regulations as well as the accepted
regulations of the state of the art.
6.2
Lifting and transporting the machine
The machines in the series may only be suspended from the lug provided
(see position 6, figure 4).
The machine may swing outwards. Be aware of the centre of gravity when
lifting and follow the lifting instructions!
Packaging
The machine must be correctly packed in the original packaging prior to
transporting to its destination. The package must be fixed on a Europalette
or similar system so that the machine cannot tip over.
The packaging should protect the individual components up to their
assembly, from transportation damage, corrosion and other damage.
Therefore, the packaging must not be disturbed and only removed shortly
before assembly.
ENVIRONMENTAL DAMAGE THROUGH DISPOSAL!
Packaging material is a valuable product and can, in many cases, be re-
used or carefully prepared and re-used. Therefore:
The packaging material must be disposed of in an environmentally
friendly manner
The local disposal regulations should be observed ; if necessary, a
company qualified in disposal matters should be contracted to do
so.
6.3
Storage
The machinery of the construction series ZIRKON must be stored in a dry
situation that has normal air humidity
At a relative humidity above 80% it is recommended that the site is enclosed
in a sealed cover containing a drying agent.
Storage for longer than one year should be avoided.
