7
On/Off
Button
Digital Clock
Rotary Dial
Clock Key
Day of Week
Day Key
Setting the Time & Day
• To set the Time and/or Day the Brivis Networker must be
turned OFF
using the ON/OFF button.
• Press Key 5 (clock) and the screen will display the message “Clock setting mode”, and then the Digital Clock will flash.
• Use the Rotary Dial to select the right time.
• Press key 1 until the correct day appears eg: Mon.
• Press Key 5 (clock) again to save the changes.
Setting the Cooler to turn itself ON
• Press the PROG key and the display will flash ON TIME and the word PROGRAM.
• Rotate the round dial to set the ON TIME ie. the time you want the Cooler to come ON.
• You can change the settings the cooler will run at here. If in Manual mode, rotate the round dial to adjust the fan speed
and press key 2 to turn the pump ON or OFF. If in Auto mode, rotate the round dial to adjust the comfort level.
• Press key 3 to activate the Timer.
• Press the PROG key to exit and save your setting.
Wall Control
Setting the Cooler to turn itself OFF
If the Cooler is ON and you want to set a time for it to turn OFF, the steps are almost the same as above (
Note:
the
cooler must be turned on).
• Press the PROG key and the display will flash OFF TIME and the word PROGRAM.
• Rotate the round dial to set the OFF TIME ie. the time you want the Cooler to turn OFF.
• Press key 3 to activate the Timer.
• Press the PROG key to exit and save your setting.
Checking your Timer Settings
Once Timer settings are made you can review or cancel them in a number of ways:
• The words On Time or Off Time will remain on the screen to show that the Brivis Networker is now holding your
pre-set ON or OFF time.
• If you want to check what you’ve done, press the PROG key and the pre-set time will flash. You can now make
adjustments to your settings if required.
• If you change your mind and want to cancel the function, press the On Time/Off Time Key 3 and this will
cancel the function.
• To exit this setting program push either the On/Off button or the PROG key. Once again the Brivis Networker
remembers the last setting and the next time you select the Timer it will go to that same setting.
Note:
If you have dual Brivis Networkers installed, only the Master control has the ability to set the clock time. The
Master control can be identified by the word “clock” beside Key 5, while the Brivis Networkers are in the off position.
Note:
The ON TIME key remains displayed. To cancel the Timer press key 3.
Note:
The OFF TIME key remains displayed. To cancel the Timer press key 3.
CAAB022832O Cool Owners ISSUE D_021073O 24/08/15 10:21 AM Page 9
