On/Off
Button
Digital Clock
Prog Button
Rotary Dial
On Time
& Off
Time Key
On/Off Button
Pump Key
Fan Symbol
Fan Speed
Indicator
Rotary Dial
Fan Key
6
Manual Operation
Manual operation enables you to control the fan, its speed, and the pump manually. To run the Cooler in Manual
mode, just follow these steps:
• Turn the Brivis Networker on using the ON/OFF button.
• Press the Auto key until “MANUAL” appears on the screen.
• Press key 1 to turn the fan on (if the symbol of the fan is not on the screen).
• Press key 2 to turn the pump on (if the symbol of the water droplets is not on the screen).
• Rotate the round dial to set the fan speed level you desire. (up to increase the fan speed and down to decrease
the fan speed.) The message “Pre-Wetting cooler pads – Please Wait!” will scroll across the display. It will take
approximately 8 minutes for the unit to complete the pre-wet before the fan will turn on.
Using the Timer
When the Cooler is operating, you can pre-set a time for the Timer to turn the Cooler OFF. Also, when the Cooler
is turned OFF, you can select a time for the Timer to turn it ON automatically. So if you are out for the day you can
set the Cooler to come on and cool the house before you return. To use the timer function you firstly need to set the
time and day.
Caution:
If the pump is going to be used, adequate ventilation (openings) needs to be provided to prevent condensation
build up.
Note:
On days of high humidity the fan may be operated without the pump. To turn the pump OFF press key 2
and the water droplets will disappear. The next time you return to Manual these steps will not be necessary because
the Brivis Networker remembers your previous settings.
CAAB022832O Cool Owners ISSUE D_021073O 24/08/15 10:21 AM Page 8
