British Gas 330, Инструкция по использованию, установке и обслуживанию

Страница: 7 / 44

7 0020008877-04
Diagram 1.1
13436
1.1 IMPORTANT NOTICE
The boiler is supplied in one carton, which includes a fittings and
documentation pack.
This boiler is for use on Natural Gas (G20) as distributed in the
United Kingdom and Ireland and cannot be used on any other
gas.
Where no British Standards exists, materials and equipment
should be fit for their purpose and of suitable quality and
workmanship.
The installation of this boiler must be carried out by a competent
person in accordance the rules in force in the countries of
destination.
Manufacturer’s instructions must not be taken as overriding
statutory requirements.
1.2 Statutory Requirements
The appliance is suitable only for installation in GB and IE and
should be installed in accordance with the rules in force.
In GB the installation of the boiler must be carried out by a
competent person as described in the following regulations:
The manufacturer’s instructions supplied.
The Gas Safety (Installation and Use) Regulations.
The appropriate Buildings Regulations either The Building
Regulations, The Building Regulations (Scotland), The Building
Regulations (Northern Ireland).
The Water Fittings Regulations or Water byelaws in Scotland.
The Health and Safety at Work Act, Control of Substances
Hazardous to Health (COSHH).
1 Technical Information
The Current I.E.E. Wiring Regulations, sixteenth edition.
British Standard 7671:2001, requirements for electrical
installations.
In IE, the installation must be carried out by a competent
person and installed in accordance with the current edition of
I.S.813 "Domestic Gas Installations", the current Building
Regulations and reference should be made to the current ETCI
rules for Electrical Installation.
In GB the following Codes of Practice apply:
BS4814, BS6798, BS5440 Part 1 and 2, BS5546 Part 1,
BS5449, BS6891, BS6700, BS7074 Part 1 and 2, BS7593.
In IE: I.S.813, BS5546, BS 5449, BS 7074, BS 7593.
Manufacturer’s instructions must not be taken as overriding
statutory requirements.
NOTE: For further information, see the current issue of the
Building Regulations, approved document L1 ( in the UK) and
the following current issues of:
1) Central heating system specification (CheSS) and
2) Controls for domestic central heating system and hot water.
BRECSU.
Certification
This boiler certificated to the current issue of EN 483 for
performance and safety.
It is important that no alteration is made to the boiler, without
permission, in writing, from British Gas.
Any alteration that is not approved by British Gas, could
invalidate the warranty and could also infringe the current issue
of the Statutory Requirements.
RETURN FLOW
375
75
73
54
610
53
48
113.5
13
133
48
CONDENSATE
TRAP OUTLET
GAS
GAS
C
L
BOILER
C
L
FLUE
176
334
33
THIS DIMENSION
CAN BE INCREASED
TO 600 MAX.
CONDENSATE
TRAP OUTLET
30