Instructions for Installation & Use - Series No. 6100/A/2013
Instructions for Installation & Use - Series No. 6100/A/2013
34
CARE & MAINTENANCE
CARE & MAINTENANCE
35
TO REMOVE COVER:
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness
buckle.
C. Remove any accessories, Ez buckle system (if fitted)
and shoulder pads (if fitted). (see page 39).
D. Lower backrest to the lowest position, Unclip press
studs from the front of the headrest cover.
E. Lift the top of the headrest cover over the moulding
and then pull down cover away from moulding.
F. Lift headrest up to highest position. Unclip the press
studs on the cover in the middle panel.
G. Peel away elastic seam of the cover from the seat
shell.
H. Remove the cover while feeding the crotch buckle,
harness tongues and strap through the lap and
crotch strap slots in the cover. If fitted with a harness
adjuster button, peel the cover over the harness
adjustment housing starting at one corner.
Crotch slots
Lap slot
Peel away from
backrest moulding
moulding
Peel away
from shell
D
E
F
H
