Instructions for Installation & Use - Series No. 6100/A/2013
Instructions for Installation & Use - Series No. 6100/A/2013
32
33
CARE & MAINTENANCE
CARE & MAINTENANCE
COVER (STYLE MAY VARY)
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on the
care label attached to the cover. If fluffy cover is fitted then washing cover prior to use will remove excess
fluff.
The cover has been designed to protect your child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food or drink products may cause damage or
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
ONLY USE BRITAX SAFE-N-SOUND SEAT COVERS AND ACCESSORIES THAT ARE DESIGNED
AND TESTED FOR USE WITH THIS PRODUCT.
Click
TO CLEAN HARNESS BUCKLE:
If sticky liquids such as baby formula, fruit juice, etc. get inside your
harness buckle, it may become sluggish. An indication of a sluggish
harness buckle is that you cannot hear a click when engaging the
harness tongues. To restore the harness buckle to good working
order it needs to be cleaned as follows:
A. Remove the harness buckle from the restraint: From the underside
of the restraint pull each crotch 3-bar slide then turn the 3-bar slide
and push back through each slot.
B. Place the harness buckle under warm (max. 40 degrees Celsius)
running water as shown below. Let the water run through the
mouth of the buckle for five minutes. Check the harness buckle is
clean by engaging the harness tongues and buckle several times
until you hear a click.
C. If you still cannot hear a strong audible click then repeat the
cleaning process several times.
D. Refit the harness buckle to the restraint ensuring the red button
facing outwards and the 3-bar slide is fed through the same slots.
The 3-bar slide must be repositioned against the seat shell.
If the Harness Buckle cannot be returned to its original
working condition then contact BRITAX Customer Service for
assistance.
Cover
Body
3- bar
slide
BUCKLE OPERATION
To ensure the buckle remains operational the inside of the buckle must be kept free of liquids, sand, dirt,
fluff, food or similar substances. If the buckle is not operating or you do not hear a strong audible click when
the second tongue is inserted, the buckle needs to be washed or replaced. Contact Customer Service for
assistance.
VERY IMPORTANT
:
Only replace the cover with BRITAX Safe-n-Sound supplied
replacement cover with identical shoulder height markers or a
replacement cover meeting AS/NZS 8005.
A
B
C
