Instructions for Installation & Use - Series No. 6100/A/2013
Instructions for Installation & Use - Series No. 6100/A/2013
28
HOW TO USE
29
PLACING CHILD IN THE RESTRAINT
A. Lengthen the harness by lifting up the
harness adjustment lever while pulling
both shoulder straps evenly. Release
the harness adjustment lever when the
shoulder straps are long enough. Place
tongues in Harness Tongue Holders.
If the harness appears hard to lengthen,
deploy the ISOFIT connectors with the
green handle (page 14, Ref 23) and
ensure the shoulder straps are not
trapped.
Adjust the shoulder straps as required
and ensure ISOFIT system is pushed
fully inwards if using seatbelt installation.
B. Place child in the restraint and feed each arm
through shoulder straps. Pull harness buckle up
between child’s legs.
Adjuster Strap
HOW TO USE
Harness
adjustment
lever
Pull to
lengthen
C. Fit either harness tongue into the harness
buckle followed by the other tongue
until a click is heard. Should the second
tongue not insert, press the red button and
reinsert the tongues. When both tongues
are inserted the harness is fully engaged.
Ensure secure engagement by pulling the
harness straps.
Click
Tongue
Buckle
C
D. Remove all of the slack from the harness lap
straps by pulling shoulder straps.
E. Pull the harness adjustment strap to adjust
harness to a comfortable but firm fit. Check that
the slack in all straps is removed. The shoulder
harness straps must fit firmly to the child. A
loose harness could result in serious injury in an
accident.
Always adjust the height of shoulder straps as
the child grows.
Harness Lap
Straps
Shoulder Straps
Crotch Straps
Pull to remove
slack from
harness lap
straps
D
CAUTION: A LOOSE HARNESS IS
DANGEROUS.
Do not use restraint if straps do not tighten.
Contact Britax or your local authorised service agent for repair.
Pull to
tighten
DO NOT LEAVE CHILDREN
UNATTENDED IN THE CAR.
Harness Tongue
Holders
FORWARD FACING
FORWARD FACING
E
