Britax Strider Compact страница 45 Скачать руководство пользователя

Страница: 45 / 74

I Attach hook and loop tabs

on canopy to the liner on

both sides and in two places

near the main locking lever.

NOTE: A body band is also

installed in the base

of the bassinet for

optional use.

To use the body band,

remove the mattress,

open the body band,

and then place the

mattress back into the

bassinet. When not in

use, store the body

band under the

mattress.

NOTE: D-rings are installed

in the base of the

bassinet for optional

baby harness.

The Baby harness is

not supplied but can

be purchased

separately at an

independent baby

store.

L Line up plastic moulding

on sides of bassinet with

sockets in the middle of the

stroller frame.

M Lower the bassinet all the

way down until it engages

into the sockets on both

sides.

N Ensure Bassinet is

securely locked on by

trying to pull up.

NOTE: The bassinet can only be installed rearward (facing mother position) on

the stroller frame. The frame will not fold with bassinet installed so it must be

removed before folding.

2.3 BASSINET ASSEMBLY, FITTING & REMOVAL

Cont...

O To remove bassinet from

the stroller, firmly lift and

hold the main lever up.

Once released, lift the

bassinet out of the

stroller.

Содержание Strider Compact











































































Результаты поиска

Содержание Strider Compact

Отзывы:

Похожие инструкции для Strider Compact

Бренды по названию

Популярные бренды

Britax Strider Compact, Инструкция пользователя

Результаты поиска

Содержание Strider Compact

Отзывы:

Похожие инструкции для Strider Compact

Бренды по названию

Популярные бренды