Britax Strider Compact страница 67 Скачать руководство пользователя

Страница: 67 / 74

4.16 FITTING & REMOVING INFANT CARRIER

FROM SECOND SEAT FRAME

B Raise the backrest

adjusting lever and lift the

head end of the second

seat so that the foot end

slides down the stroller

frame and engages into

the second lock (S29).

When locked, frame is

slightly above horizontal.

A Lower the second seat

frame and push down to

lock the leg tubes (SS9)

into the lower stroller frame

mouldings (S30).

Repeat step L if the frame

doesn’t lock into place.

D Push down on the infant

carrier and make sure it is

place in the frame

mouldings. The infant

carrier now needs to be

locked securely into the

frame.

E By squeezing in and

holding the latches on

either side of the handle,

rotate the handle

backwards. The GREEN

indicator will now to RED.

F Release the handle latches.

Then with one hand holding

the front of the infant carrier,

push the infant carrier

handle all the way down

until you hear it lock into

the frame.

C For easier installation,

remove stroller seat or

infant carrier from frame,

(see sections 1.15 (b) &

3.2 (O)). The infant carrier

must face towards the front

of the stroller. With the

infant carrier handle in the

upright position, locate the

infant carrier handle

mouldings on either side,

directly over the second

seat frame mouldings.

Notice the indicator is

GREEN.

CAUTION

S30

S29

Содержание Strider Compact











































































Результаты поиска

Содержание Strider Compact

Отзывы:

Похожие инструкции для Strider Compact

Бренды по названию

Популярные бренды

Britax Strider Compact, Инструкция пользователя

Результаты поиска

Содержание Strider Compact

Отзывы:

Похожие инструкции для Strider Compact

Бренды по названию

Популярные бренды