Britax Strider Compact Скачать руководство пользователя страница 42

Страница: 42 / 74

IMPORTANT NOTES:

•

THE STRIDER AND STRIDER PLUS BASSINETS ARE THE ONLY BASSINETS

DESIGNED TO FIT THE COMPACT STROLLER.

• REMOVE THE STROLLER SEAT OR INFANT CARRIER FROM THE FRAME

BEFORE FITTING BASSINET.

• ALWAYS REMOVE YOUR CHILD FROM THE BASSINET BEFORE FITTING OR

REMOVING FROM THE STROLLER FRAME.

• THE BASSINET MUST ALWAYS FACE TOWARDS THE HANDLE.

• THE BASSINET MUST BE REMOVED FROM THE FRAME BEFORE FOLDING.

• DO NOT LIFT THE STROLLER BY THE BASSINET.

WARNINGS:

• DO NOT USE THE BASSINET ONCE THE CHILD CAN SIT UP.

• IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH THIS

STROLLER.

•

DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED FOR

USE WITH THIS STROLLER BY BRITAX.

• THE MAXIMUM WEIGHT OF THE CHILD USING THIS PRODUCT IS NOT TO

EXCEED 9KGS.

2.2 BASSINET PARTS

Bassinet

Frame

Bassinet

Liner

Bassinet

Mattress

Bassinet

Boot cover

2.1 BASSINET WARNINGS & IMPORTANT NOTES

(Bassinet sold separately)

Содержание Strider Compact











































































Результаты поиска

Содержание Strider Compact

Отзывы:

Britax Strider Compact, Инструкция пользователя, Страница: 42 / 74

Результаты поиска

Содержание Strider Compact

Отзывы: