Britax Strider Compact Скачать руководство пользователя страница 16

Страница: 16 / 74

A To lock both rear wheels, press the red

brake lever all the way down until you hear

a click. The indicator will change to red.

Push the Stroller back and forth to confirm

the wheels are locked.

1.9 TO OPERATE THE BRAKE

B To unlock both rear wheels, press the red

brake lever all the way down until you

hear a click. The indicator will change to

green.

Indicator

A For swivel wheel mode

slide both red latches up

until they lock it into

position.

B To lock the front wheels

into the fixed position,

slide both red latches down

until they lock.

C The front wheels will

automatically lock into

the fixed position when

you move the stroller

forward by

approximately one metre.

1.8 SWIVEL/FIXED FRONT WHEEL OPERATION

NOTE: Always lock the swivel wheels when using the stroller on rough surfaces as this will
minimise wheel wobble.

WARNING:

ALWAYS APPLY THE BRAKES WHEN THE

STROLLER IS STATIONARY.

NOTE: It is recommended to leave the brake locked during the remainder of the

stroller and accessory assembly.

Содержание Strider Compact











































































Результаты поиска

Содержание Strider Compact

Отзывы:

Britax Strider Compact, Инструкция пользователя, Страница: 16 / 74

Результаты поиска

Содержание Strider Compact

Отзывы: