Instructions for Installation & Use - Series No. 40/A/2013
Instructions for Installation & Use - Series No. 40/A/2013
58
59
INSTALLATION OF CAR'S UPPER
ANCHORAGE POINT
INSTALLATION OF CAR'S UPPER
ANCHORAGE POINT
Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage
points and the possible use of spacers. Some vehicles may have an anchor fitting
fitted by the vehicle manufacturer. If anchorage points cannot be found refer to car
manufacturer or local child restraint fitting station or traffic authority for optimum position
of upper anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical panel can only be
installed in one way. Please refer to vehicle owner’s handbook or a child restraint fitting
station for correct method.
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED
AS IT PREVENTS THE RISK OF INCORRECT FITMENT OF
THE ATTACHMENT CLIP TO THE UPPER ANCHORAGE
POINT. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS
CORRECTLY ENGAGED TO THE UPPER ANCHORAGE POINT
AND NOT HOOKED OR FITTED TO ANY OTHER OBJECT
BEFORE EACH USE OF THE RESTRAINT. THIS IS ESPECIALLY
IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS,
HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL
SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT:
Extension Strap distance to be measured.
Length 300mm (Use Safe-n-Sound part 0035 or equivalent).
Length 600mm (Use Safe-n-Sound part 0036 or equivalent).
Available from all major child restraint retailers.
Adjustable upper
Anchorage strap.
FRONT OF VEHICLE
Distance to measure to
the upper anchorage
point
The shaded areas of this diagram illustrate the possible locations of the upper anchorage
point. Within each shaded area is an upper anchorage point showing the correct way to
install the fitting. Ensure the upper anchorage point is aligned as illustrated unless stated
otherwise in the vehicle owner’s handbook.
