Open the other lock-off arm , feed the seat belt under the lock-off arm and
attach the tongue into the buckle
(dia 3g)
.
3. Installing your child seat (rearward facing) in rear middle seat
IMPORTANT
- This child seat has been designed to perform safely and independently of further external restraint.
3h
Pull all of the seat belt slack through
the child seat ensuring the seat belt
is not twisted
(dia 3h)
. When the belt
is as tight as possible, close the lock-
off arms on
BOTH
sides of the seat
ensuring that they click into place.
If the buckle now lies in the position
marked as wrong with a and the
seat belt cannot be correctly tightened
(dia 3i)
, try another seating position in
the car.
0-25kg
3i
3g
3f
Pull off sufficient lap and diagonal belt
(approx.600-900mm)
. Open the lock-off
arm on the side opposite the seat belt buckle. Pull back the child seat cover to
reveal the crotch strap. Feed the belt through the lock-off belt guide and seat
shell slot
(dia 3f)
on to the top face of the seat base, behind the crotch strap
(inset)
and down through the slot on the other side of the child seat.
Finally tighten the tether straps by pulling the loose ends downwards
(dia 3j)
until the footprop touches the floor. The footprop must rest on a solid floor - not
on lids of storage boxes or similar.
Once firmly strapped in, test the child seat by trying to move it back and forth
and side to side. If it seems loose, you must re-install until firmly installed.
DO NOT
rest the back of the child seat against the driver or front passenger
seats.
3j
Securay HiWay_text.indd 10
04/02/2009 09:39:11