manualshive.com logo in svg

Britax 7200/A/2010, Инструкция по эксплуатации

Поделиться
Скачать
Britax 7200/A/2010 Скачать руководство пользователя страница 34

HOW TO SETUP

34

Engage 
Seatbelt 
tongue

Buckle

Ensure lap part of 
seatbelt is below the 
hooks

Seatbelt 
lock-off lever

Lap Seatbelt

Hook

Pull sash portion of seatbelt 

through the lock-off to remove 

slack

J.

 Fully lengthen seatbelt. Thread the seatbelt into forward facing seatbelt path (yellow marker) as 

shown below, ensuring that the seatbelt is behind the harness straps and that the lap part of the 
seatbelt is below the hook as shown below, on each side.

 

K.

 Engage seatbelt buckle and tongue. Firmly push down on the seat with knee or hand, whilst pulling 

the sash belt with the other hand to tighten the lap portion of the car's seatbelt. Feed the sash 
portion into the lock-off and whilst holding the belt tension, press the lock-off lever to clamp the 
sash belt. For inertia/retractable seatbelts, allow excess belt to feed back into retractor. 

L.

 If using just a lap seatbelt, thread the seatbelt through the back of the seat following the belt path. 

Keep the belt under the hook on each side. Then engage the buckle and tighten the seatbelt so the 
restraint is held firmly against the car's back.

Yellow 

FORWARD-
FACING BELT 
PATH

 label

NOTE: 

Seatbelt extenders should not be used. If the seatbelt is not long enough to secure the child 

restraint. If they are used then the buckle tongue must not enter the seating zone. 

Push down on the seat

FORW

ARD   F

ACING 

Содержание 7200/A/2010





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды