Britax 7200/A/2010 Скачать руководство пользователя | Manualshive

Страница: 3 / 60

background image

INTRODUCTION

3

To be used only in a rearward-facing position for an infant until their shoulders reach the lower
shoulder height marker (approximately 12 months of age). Then to be used in a forward-facing
position until their shoulders reach the upper shoulder height marker (approximately 4 years of age).

Continue to use this child restraint until the child reaches this limit.

Do not use forward facing until child's shoulders are above the lower shoulder height marker.

Infants are at risk of serious injury if they face forward too early.

Children are at risk of serious injury if they move to booster seats too early.

Children that have outgrown this restraint are safest in a booster seat until their shoulders reach the
upper shoulder height marker of the booster seat.

CAREFULLY READ ALL THE INSTRUCTIONS FOR INSTALLATION. IN THE EVENT OF DOUBT ABOUT
THE METHOD OF INSTALLATION, CONSULT BRITAX CHILDCARE OR AGENT OR A CHILD RESTRAINT
FITTING STATION AUTHORISED BY A RELEVANT TRANSPORT AUTHORITY OR, IN NEW ZEALAND,
THE AGENT FOR THE VEHICLE.

No child restraint can guarantee absolute protection from injury in every crash. However, to ensure
that your child gets all the protection designed into the restraint PLEASE READ AND FOLLOW THESE
INSTRUCTIONS EXACTLY and use only BRITAX Safe-n-Sound recommended parts and accessories.

You purchased a model with the added protection of a Side Impact Cushion Technology™ you can see
the Side Impact Cushion fitted on the sides of the seat. There is no installation or assembly required
to activate the Side Impact Cushion, it only functions in a side crash to provide additional protection to
the occupant.

THIS RESTRAINT MUST BE ATTACHED TO A CHILD RESTRAINT ANCHORAGE POINT IN THE CAR.
REFER TO CAR OWNER’S HANDBOOK FOR LOCATION OF ANCHORAGE POINTS. REFER TO A CHILD
RESTRAINT FITTING STATION IF NO ANCHORAGE POINTS ARE IN THE MOTOR CAR.

Always store the instruction book in the pocket provided on the side or the back of the cover.

«
1
2
3
4
5
...
»

Содержание 7200/A/2010





























































Отзывы:

Нет отзывов

Похожие инструкции для 7200/A/2010

Бренд: Nordic Cap Страницы: 4

Бренд: Hauck Страницы: 88

Бренд: Bellelli Страницы: 42

Бренд: CYBEX Страницы: 36

BebeStars TRANSPORTER 932

Бренд: Gilis Страницы: 36

Bebe Stars Young Sport Plus

Бренд: Gilis Страницы: 32

Бренд: NORAUTO Страницы: 32

Secure Snap Gear 32 CS61

Бренд: Baby Trend Страницы: 34

Grow and Go Extend N Ride

Бренд: Safety 1st Страницы: 36

Бренд: HAPPY KIDZ Страницы: 64

BCAFIX 123 ST-2

Бренд: BQS Страницы: 19

Бренд: Safety 1st Страницы: 36

Бренд: Merritt Страницы: 56

Бренд: UPPAbaby Страницы: 4

Irbag Top DS09 Plus

Бренд: Babyauto Страницы: 66

I-Level Recline

Бренд: Joie Страницы: 60

Бренд: Joie Страницы: 68

Бренд: Joie Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды