manualshive.com logo in svg

Britax 7200/A/2010, Инструкция по эксплуатации

Поделиться
Скачать
Britax 7200/A/2010 Скачать руководство пользователя страница 21

21

HOW TO INSTALL

ADJUSTING HARNESS STRAP HEIGHT & HEADREST:
FOR REARWARD-FACING MODE

Correct fitment of the harness is very important as it restrains the baby in the restraint. The headrest 
must be in the correct position and the harness must fit firmly around upper torso of the baby and be 
positioned so as to leave the baby's arms and legs free. 

For babies in rear facing mode the headrest must be in the position where the 

top

 of the shoulder strap 

slots are nearest to the child’s shoulders, but not lower than the child’s shoulders. Instructions for 
adjusting the headrest is on the next page. If your baby has reached the lower shoulder height marker 
then the restraint should be converted for “toddler use” (Refer to Forward Facing section starting on 
page 28).  

Harness 
shoulder slots.

Harness tongues and 
buckle.

Lap strap slots.

Crotch strap slots.

Harness adjuster strap.

Lower shoulder 
height marker.

Adjuster button.

REARW

ARD   F

ACING 

Содержание 7200/A/2010





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды