manualshive.com logo in svg

Britax 7200/A/2010, Инструкция по эксплуатации

Поделиться
Скачать
Britax 7200/A/2010 Скачать руководство пользователя страница 12

SUITABLE FOR USE 

DO NOT USE RESTRAINT IN REARWARD FACING 
MODE WITHOUT STABILISING BAR FULLY EXTENDED.
Do not use the restraint without the Upper Anchorage 
Strap correctly attached.
DO NOT USE A REAR FACING CHILD RESTRAINT 
WHERE AN AIRBAG IS FITTED IN FRONT OF THE 
SEATING POSITION.
Do not use on any vehicle seat which faces sideways 
or rearwards.

Never leave babies or toddlers in a stationary car in the sun because of the risk of heat exhaustion.
Ensure babies and toddlers have adequate ventilation and are shaded from direct sunlight through side 
or rear windows.

Do not allow the front seat to alter

the installed position of the restraint. 

It is permissible to allow the restraint 

to touch the front vehicle seat.

CHILD RESTRAINT ANCHORAGE

To use this child restraint, the car will need a child restraint anchor fitting in the seating position that 
you intend to use. Refer to the car owner's handbook.
If no anchor fitting is provided then you will need to install an anchor fitting. Refer to pages 52 to 55.
The anchor fitting is required for attaching the upper anchorage strap in both rear facing mode and 
forward facing mode covered later in the these instructions.

12

REARW

ARD   F

ACING 

Содержание 7200/A/2010





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды