manualshive.com logo in svg

Britax 7200/A/2010, Инструкция по эксплуатации

Поделиться
Скачать
Britax 7200/A/2010 Скачать руководство пользователя страница 23

23

HOW TO INSTALL

C

NOTE:

 For comfort ensure the bottom edges of the 

headrest are not contacting the child’s shoulders. 

                    ADJUSTING AHR EASY ADJUST HEADREST AND HARNESS 

                    STRAP HEIGHT 

A. 

 Loosen the harness straps before adjusting the headrest.

B.

 You do not need to remove the restraint from the vehicle 

to adjust the harness or headrest positions. Small 
adjustments maybe done with the child in the seat, the 
child will need to lean forward to allow the headrest to 
be adjusted.

C. 

To adjust the headrest, lift the Easy Adjust lever at the 

top of the headrest then gently pull up or push down the 
headrest so that the shoulder strap slots are level with 
or slightly above your child’s shoulders. If the headrest 
is just above the shoulders then the harness level will be 
correct.

D.  

Release AHR Easy Adjust Headrest Lever so that it locks 

into position. Ensure that it has locked in position by 
gently pushing down on the headrest.

E.  

 If the headrest is moved up, then down with the child in 

the seat, before use, check that the headrest cover has 
not bunched up behind child’s back.

AHR Easy Adjust

 

Headrest lever

Lift the Easy Adjust 
lever at the top of 
the headrest then 
gently pull up or 
push down the 
headrest 

REARW

ARD   F

ACING 

Do not adjust the headrest by pulling 
on the Side Impact Cushion. 

Содержание 7200/A/2010





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды