
HOW TO INSTALL
Attachment
Clip
10°
Important:
If using an Extension Strap,
positioning the Attachment Clip above the
baby may lead to injury in an accident
therefore make sure that the Attachment
Clip is not positioned in front of the vehicle
seat.
Extension
Strap
Attachment Clip must
not be in front of the
vehicle seat front.
Attachment Clip must
be behind the front of
the vehicle seat.
Front of
vehicle
TO REMOVE RESTRAINT FROM VEHICLE
A.
B.
C.
Disengage seat belt tongue from buckle and remove
from restraint.
Fully press Upper Anchorage Strap Adjuster Button (A)
while pulling Upper Anchorage Strap (B) to slacken as
shown right. In some vehicles loosening of the Upper
Anchorage Strap may be difficult. If so, try pushing the
restraint against the vehicle seat back or slightly lifting
the restraint to release the tension.
Disengage Attachment Clip from Anchor Fitting. The
child restraint is now disconnected.
ANGULAR ADJUSTMENT OF RESTRAINT
Some vehicle seats have more rearward slope
than others. If the angle of the seat causes the
baby to be too upright for comfort, the angle may
be altered by placing a firm packing between the
seat and the underside of the base. Packing can
be a firmly rolled up towel or nappy.
Do not remove all of the rearward slope by over
packing. Always leave a rearward slope angle of
approximately 10 degrees.
Pull Adjustment
Strap to remove
slack.
Storage
Strap
Fully press Adjuster Button (A)
while pulling Upper Anchorage
Strap (B) to lengthen.
A
B
Forward & Rearward Facing
6