Britax 25/C/2004 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 28

Britax 25/C/2004 Series Скачать руководство пользователя страница 10

Strap
Connector

WARNING: Do not

use the restraint with harness shoulder straps set at different

heights or fed through mis-matching slots. Ensure harness straps are not twisted
and that all straps are secure by pulling each harness strap.

STEPS IN CHANGING SHOULDER STRAP SLOTS

C.

E.

F.

A.

B.

D.

Remove the restraint from vehicle as instructed on page 6.

At the rear of the restraint, remove one of the harness

sho

ulder straps from metal Strap Connector by slipping strap
through open slot. The metal Strap Connector is shown
in diagram right.

Pull the shoulder strap through slot.

Insert shoulder strap through restraint slot
which will position shoulder strap level with or
above the child’s shoulder, then over the metal
bar. Ensure that the shoulder strap passes
through matching slots in cover and restraint body.

Connect shoulder strap to metal strap connector at rear of
restraint, ensuring that there are no twists in the shoulder
strap.

Repeat for other shoulder strap. It is better to change one strap at a
time so that the other strap will be a guide for re-assembly.

Remove the Padded Insert while adjusting harness. The Padded Insert should not be used
once baby weighs 10kg or over, or if it creates discomfort. If an older baby’s legs do not
have enough room, convert to child use mode (provided baby’s weight is over minimum
8kg).

WARNING:

Ensure the shoulder strap is threaded through the slot, then

over the top

of the bar at the rear of restraint & connected to the metal strap connector.

HOW TO INSTALL

INSTALLING INTO VEHICLE

(REARWARD FACING)

A.

If Upper Anchorage Strap is folded
up for storage undo Storage Strap
then lengthen as illustrated right.

Pull Adjustment Strap
to remove slack

Storage
Strap

Fully press Adjuster
Button (A) while pulling
Upper Anchorage
Strap (B) to lengthen.

A

B

HOW TO SETUP

10

Rearward Facing (Up to 12 kg)

FOR

BABY

USE

«
...
8
9
10
11
12
...
»

Содержание 25/C/2004 Series





























Отзывы:

Нет отзывов