manualshive.com logo in svg

Britax 25/C/2004 Series, Инструкции по установке и использованию, Страница: 24 / 28

Поделиться
Скачать
Britax 25/C/2004 Series Скачать руководство пользователя страница 24

ACCESSORIES & FEATURES

Head Rest straps should be over the 

top of the Restraint and through top slots.

Crotch

Buckle Pad

Shoulder

Strap Slots

Shoulder Pads

Padded insert

NEVER USE ANY SEAT COVERS OR ACCESSORIES THAT CAUSE THE SHOULDER 
HARNESS STRAPS TO WIDEN SIDEWAYS WHEN FITTED, AS THE HARNESS WILL NOT 
RESTRAIN THE CHILD CORRECTLY. 

Strap 

Connector 

The following instructions apply to accessories that may be supplied with this restraint at 
point of purchase. If not, a variety of accessories are available from various retailers of safe-
n-sound products. In the case of a small baby, accessories are available to improve the 
installed position of the baby in the restraint.

The Head Rest is designed to snugly support the 
baby or child for extra comfort. Do not use the Head 
Rest and Padded insert together if they create 
discomfort.

If fitting Head Rest for baby or child use fit straps through 
Upper Shoulder Strap Slots and over the top of the restraint 
as shown right. Slide Head Rest up or down to rest above 
the shoulder strap slots being used.

Shoulder Pads are designed to provide extra 
comfort for baby or child and are easily fitted 
to the shoulder harness straps.

The Crotch Pad is designed to provide extra 
comfort for baby or child and is fitted to the 
restraint as follows:                                                                
Feed Crotch Buckle through the slot in crotch 
pad as shown.

The Padded Insert is designed to snugly support 
the baby for extra comfort.

Remove restraint from vehicle as instructed on page 6.
Disengage harness tongues from harness buckle.
At the rear of the restraint, remove harness shoulder straps 
from metal strap connector, by slipping straps through 
open slot as shown right.
Pull the shoulder straps through slots.
Feed the shoulder strap through the slot in Padded 
Insert & restraint.
Refit the shoulder strap to the strap connector 
following the instructions on page 17, points D to F.

HEAD  REST  (if  fitted)

SHOULDER  PADS  (if  fitted)

CROTCH  PAD  (if  fitted)

PADDED INSERT (if fitted)

E.

FITTING  PADDED  INSERT

 

A.
B.
C.

D.

F.

WARNINGS

Head Rest

Head Rest

Forward & Rearward Facing 

24

Содержание 25/C/2004 Series





























Отзывы:

Нет отзывов