Britax 25/C/2004 Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 28

Britax 25/C/2004 Series Скачать руководство пользователя страница 13

PLACING BABY INTO RESTRAINT

CROTCH STRAP POSITION - BABY USE

The crotch straps must be in the inner position to accommodate the
smaller child. Refer to page 23 (Care & Maintenance) instructions
and follow point A. Ensure both crotch straps are in the inner
position as shown right.

Never wrap

baby in a blanket before placing in restraint.

A.

B.

C.

D.

E.

The harness shoulder straps should first be set to the

correct height position. Refer to page 9 for
adjusting shoulder harness strap height. The
restraint can be used with or without the
Padded Insert.

Ensure Upper Anchorage Strap is

attached to Anchor Fitting, then
slacken Upper Anchorage Strap
and allow to fall to the sides of
the restraint for easy access to
the baby.

Slacken Harness Straps by

pushing Harness Adjuster
up, grasping both
shoulder harness straps
and pulling out desired
amount of slack.
Release Harness
Adjuster lock when there is
enough slack and place
harness to each side of
restraint.

Lay baby on its back into restraint

and fit harness as shown above.
Make sure baby is dressed to allow
harness buckle to be pulled up between
baby's legs e.g. a jump suit. Make sure
baby's arms and legs are free.

Fit either harness tongue into the harness

buckle followed by the other tongue until a click
is heard.

Ensure secure engagement by pulling
harness straps.

Should the second tongue not insert,

press the red button and reinsert the tongues.

Click

Lift up

Adjuster.

(under flap)

Slackened Upper
Anchorage Strap.

Padded Insert,
if supplied, snugly
supports the baby
for extra comfort.

Harness
shoulder
straps.

Front of vehicle

Inner Crotch
Strap Position

HOW TO USE

13

Rearward Facing (Up to 12 kg)

«
...
11
12
13
14
15
...
»

Содержание 25/C/2004 Series





























Отзывы:

Нет отзывов