Britax 25/C/2004 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 28

Britax 25/C/2004 Series Скачать руководство пользователя страница 27

IN CASE OF ACCIDENT

If your restraint has been involved in a severe crash, you should destroy the restraint even if no
damage is obvious. Some insurance companies offer vehicle insurance which covers or partially
covers the replacement of your child restraint. Contact your insurance company for further
details.

Your insurance company may require you to keep the child restraint for assessment,

To assist you in making an accident insurance claim

cut the following statement and include it with your claim.

but do not

use the child restraint after a severe crash.

All Safe-n-Sound child restraints are manufactured to Australian/New Zealand
Standards AS/NZS1754-2004 which require us to advise users of child
restraints to "Destroy the entire restraint if it has been in use in a severe crash,
even if no damage is obvious". The joint Australian/New Zealand Standards
committee CS/85, advise that this statement applies whether a child was in the
child restraint or not. A severe crash, we consider as being one where the main
body structure of the vehicle is distorted.

There is no method of determining if the restraint has been damaged and we
concur with the Australian/New Zealand Standards in recommending
destruction of the child restraint.

This notice is to advise you of the requirements of the Australian/New Zealand
Standards and our obligation in complying with the standards.

Please assist the owner of this restraint in their claim.

NOTICE TO INSURANCE COMPANY

CHILD RESTRAINT INVOLVED IN AN ACCIDENT

Britax Childcare Pty. Ltd.

Head office and registered address:

99 Derby Road Sunshine Victoria 3020
PO Box 147 Sunshine Victoria 3020
Telephone: 1300 303 330

(Incorporated in Victoria)
A.B.N 55 006 773 600

27

Forward & Rearward Facing

«
...
25
26
27
28
»

Содержание 25/C/2004 Series





























Отзывы:

Нет отзывов