25
Version 2.0F
WHS-201 installation instructions
» Si las pérdidas persisten, corte el suministro de agua
y llame al Servicio al Cliente o consulte a su fontanero
local.
*
Cierre el suministro de agua hacia la vivienda.
*
Purgue toda el agua existente en las
cañerías abriendo todos los grifos de su casa y
desagotándolos completamente.
*
Presione el botón rojo de alivio de la presión
en la parte superior del cabezal de la carcasa
para liberar la presión.
*
Desenrosque y retire el cabezal de la carcasa
utilizando la llave de la carcasa del filtro.
*
Retire el retén anular negro del filtro e
inspecciónelo. Límpielo y lubríquelo con grasa
siliconada.
*
Limpie las acanaladuras de la parte superior de
la carcasa del filtro donde se asienta el retén
anular.
*
Coloque nuevamente el retén anular limpio y
lubricado en la acanaladura.
*
Enrosque la carcasa del filtro nuevamente
en el cabezal y apriete a mano. NO APRIETE
DEMASIADO.*
Guía de localización y
solución de problemas
*
Cierre el suministro de agua hacia la vivienda.
*
Purgue el agua de las tuberías de suministro
abriendo todos los grifos de la vivienda y
desaguando completamente.
*
Apriete todos los accesorios de conexión.
*
Abra el suministro de agua de la vivienda y
revise si hay fugas.
*
Si las fugas continúan, desensamble la unidad
configurada, vuelva a aplicar cinta o sellador y
reinstale el filtro.
Fugas alrededor de
los acoples
25
Nota: Coloque toallas de papel o un paño debajo de la carcasa del filtro para recoger un posible goteo.
Reemplazo del filtro
(cada 3 meses)
Para recordatorios GRATIS de cambio del filtro, ingrese a
www.protectplus.com
filtración doméstica
RE
EM
PL
AZO CADA
TRES ME
SE
S
*Nota: Para evitar fugas y/o rupturas de la carcasa, asiente el cartucho del filtro adecuadamente en la parte superior e inferior
de esta.
filtración doméstica
• Abra lentamente el suministro de agua a la vivienda.
• Revise si hay fugas.
• Presione el botón de descarga de presión rojo para
liberar el aire atrapado.
• Abra el grifo y purgue durante 40 minutos.
Paso 5
Para purgar
o limpiar
el nuevo filtro
• Cierre el suministro principal de agua a la vivienda.
• Abra todos los grifos de su vivienda para eliminar
el agua de las tuberías.
• Presione el botón rojo de alivio de presión.
• Utilice la llave para retirar el alojamiento del filtro.
• Tenga cuidado: El alojamiento del filtro contendrá
agua.
• Enjuague el alojamiento del filtro.
• Llene 1/3 con agua y añada 2 cucharadas Clorox® de lejía.
• Limpie el cabezal y la carcasa.
• Enjuague el cabezal del filtro meticulosamente para
eliminar la lejía.
• Retire y limpie la junta tórica.
• Lubrique la junta tórica con grasa de silicona.
• Coloque nuevamente la junta tórica y asiéntela
de forma segura para lograr un sello adecuado.
• Inserte el filtro nuevo sobre el tubo vertical en la
parte inferior del alojamiento del filtro.
• Fije la carcasa al cabezal y apriete a mano.
• Utilizando la llave, apriete 1/4 de vuelta.
¡NO APRIETE DEMASIADO!
Paso 1
Paso 2
Limpie el
alojamiento del
filtro
Desenrosque el
alojamiento del
filtro
Antes de comenzar
Paso 3
Limpie y lubrique
la junta tórica
Paso 4
Inserte el filtro
nuevo
Содержание WHS-201
Страница 13: ...13 Version 2 0F WHS 201 installation instructions nt n Filter er er ...
Страница 14: ...14 ...
Страница 27: ...27 Version 2 0F WHS 201 installation instructions mentos que de plegado ...