General Information
4
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
This product has been tested to the TMV2 scheme which complies with the BS
EN 1287:1999 (LP) and BS 1111:1999 (HP) thermostatic mixing valve standards.
It also satisfies the requirements of the water supply (water fittings) regulations
1999 and current bylaws.
BS 6700 recommends the temperature of stored water should never exceed
65
°
C. A stored water temperature of 60
°
C is considered sufficient to meet all
normal requirements and will minimise the build up of lime scale in hard water
areas.
Important: Nominally equal (balanced) inlet supply pressures are
recommended for optimum performance with mixer showers.
This shower valve should be installed in compliance with the Water Regulations.
If in doubt, contact a registered plumber or your Local Water Authority or the
Secretary of The Institute of Plumbing, address as follows;-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex, RM12 6NB
Tel:01708 472791
Guide to designations
HP
High Pressure
LP
Low Pressure
S
Shower