Installation – Shower Valve Outlet
4. Fit wall outlet
There are two methods of fixing the wall
outlet depending on the wall type:
A: With rear access once wall finished
Remove the backnut from the wall outlet.
Insert the wall outlet through a 21-24mm
hole in the wall and secure with the backnut.
Plumb in the wall outlet assembly to the
shower valve outlet.
B: Without rear access once wall finished
Fit a ‘wall plate elbow’ (not supplied) within
the wall cavity and plumb in from the shower
valve.
Once the wall has been finished, remove the
backnut from the wall outlet.
Note: The backnut is not required.
Screw the wall outlet into the ‘wall plate
elbow’ using a suitable thread sealant.
Outlet
Backnut
17
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.