BRINKMANN-Cutter pumps SBC152
0…1820
BE8085
Edition
11/2019
3
Limit of Application (Table 1)
ATTENTION
The pumps are to be operated within their design
limits.
Applications outside of these limits are not ap-
proved. The manufacturer is not responsible for any
damages resulting from use of the pumps in such
applications.
2.3
Technical data
Type
SBC
WARNING
Risk of fire and explosion!
Pump may not be used in potentially explosive
environments.
Mediums
Coolants,
cooling- and cutting-oils on
request.
Flashing point of the
medium to be
pumped
≥ 150 °C
Chip material
Aluminium
max. chip to coolant ratio by
weight: 1.5%
Chip geometry
Chip bundles to max. Ø 100
mm
Kinetic viscosity of
the medium
...45 mm
2
/s
Temperature of me-
dium
0 ... 80 °C
Dry running
Dry running causes in-
creased wear and should be
avoided.
During the test of the direc-
tion of rotation (< 30 s) per-
missible.
min. delivery vol-
ume
1.5 % of Q max.
Switching-on fre-
quency per hour
The pump SBC should be
operated in continual opera-
tion mode,
not pulsed
mode
.
Ambient tempera-
ture
40 °C
Set-up altitude
1000 m
Type
Max. del.
pressure
bar / spec.
weight 1
Max. del.
volume
l/min
Dimensions
H
mm
h
mm
Length
l mm
Weight
kg
Power
50 / 60 Hz
kW
SBC1520
2.9
1375
906
537
414
132
7.5 / 8.6
SBC1820
3.4
1425
915
608
422
163
11 / 12.6
Pipe connection: Suction side DN125/PN16,
Pressure side G 2 ½ .
The motor is surface-cooled and compliant with
DIN IEC 34 and EN 60034 (protection degree IP 55).