BRINKMANN-Cutter pumps SBC152
0…1820
BE8085
Edition
11/2019
13
ATTENTION
Assembly help and detailed instruction is de-
manded for the assembly of the pump and
adjusting of the cutting unit!
– Request the required documents from the
manufacturer.
– Note torques for the screw connections!
– Position the pump laterally and fill the pump
blocking chamber (-GD) with oil until it
reaches the oil inspection window (27)
(1.1 litres).
– Fit the sealing ring (28) and screw on the
screw plug (27).
– Pump Installation. Secure pump against fall-
ing over. i.e. with use of safety straps.
– Reconnect immersion pump as described in
point 5.
ATTENTION
– When putting the pump back into use,
make sure the direction of rotation is
correct
(see point 6.1)
!
12
Disposal
When disposing of the pump or the packaging
materials the local and national regulation for
proper disposal must be complied with.
– Prior to its disposal, the pump must be com-
pletely drained and decontaminated if neces-
sary.
Thread -
M5
M6
M8
M10
M16
Strength
classes
8.8
8.8
12.9
8.8
10.0
8.8
Tighten-
ing
torque
(Nm)
3
Nm
4.5
Nm
16
Nm
Item 82
20
Nm
30
Nm
Item
32
60
Nm
Tightening torques for screwed connections