STEP 1
Attach the three legs to smoker body using 10-24 x
s
" screws and
square nuts as illustrated.
4
STEP 2
a. Attach the three lower support brackets (V clips) to inside of smoker
body through the three
4
" holes that are located about halfway down
on sides. Mount each bracket with notched side facing up using
10-24 x
s
" screws and square nuts. Tighten screws securely.
b. Attach the three upper support brackets (single clips) to inside of
smoker body through the three
4
" holes located near the top edge.
Mount each bracket with notched side facing up using 10-24 x
s
"
screws and square nuts. Tighten screws securely.
STEP 3
a. Attach wooden handle halves to metal brackets using 8-32 x
w
"
screws and nuts as illustrated.
b. Attach two handle assemblies to side of smoker body using
10-24 x
s
" screws and square nuts as illustrated.
Lower support bracket
(V-clip) with notched side
facing up.
Upper support bracket
with notched side
facing up.
INSTR_810-5302-S.QXD 11/1/07 11:42 AM Page 5
Downloaded from
www.Manualslib.com
manuals search engine
