Brink Pure induct Скачать руководство пользователя страница 12

Страница: 12 / 20

Pure induct

4. Installation

4.1 Installation requirements

•

To ensure the safe functioning of the appliance, the appliance must be installed and
connected by qualified personnel.

•

The Pure induct must be used indoors in a ventilated room under temperature
conditions of 0 to 50 °C with a relative humidity of 0 to 90%.

•

The machine must be connected to the ventilation system, induct or end-of-pipe, by
using flange clamps. If the existing pipes of your ventilation system have different
measurements, it is necessary to use adaptors. These can be ordered at Brink.

•

The direction of the air flow in the ventilation system to the Pure induct should occur
as displayed above by the air flow direction indicator.

•

Mounting brackets with an inside diameter of 200 mm as shown in the image are
recommended to secure the appliance to any surface using screws.

•

Connect the power cord to a grounded power outlet. Do not connect voltages other
than the labelled factory requirement (~110-240 VAC, 50-60 Hz).

•

Do not remove the protection grid of the front and/or back of the appliance.

ventilation
shaft

ventilation

shaft

connected to

grounded

power

outlet ~110-240
VAC, 50-60 Hz

mounting

brackets

flange

clamps

flow direction indicator

Содержание Pure induct





















Результаты поиска

Содержание Pure induct

Отзывы:

Похожие инструкции для Pure induct

Бренды по названию

Популярные бренды

Brink Pure induct, Руководство по установке

Результаты поиска

Содержание Pure induct

Отзывы:

Похожие инструкции для Pure induct

Бренды по названию

Популярные бренды