21
3. Remove the Kettle from the power base. Wipe the inside of the Kettle with a soft,
damp cloth until dry.
WARNING: NEVER IMMERSE THE POWER BASE IN WATER.
4. Wipe the power base with a damp cloth or sponge. Dry thoroughly.
5. Use a soft polishing cloth to remove any fingerprints or surface dirt from the body.
WARNING: Do not use harsh chemicals or abrasive cleansers as these may damage the
finish of the Kettle.
6. Make sure both the power base and the Kettle’s body are completely dry after cleaning
and before use.
Descaling
Minerals, lime and calcium found in hard-water areas can accumulate and affect the
operation of your Kettle. Depending on water conditions and frequency of use, your Kettle
should be cleaned once a month with distilled vinegar or fresh lemon juice to remove scale.
1. Before cleaning your Kettle, make sure the power base is unplugged and the Kettle is cool.
2. Fill the Kettle with 1 part white vinegar or lemon juice to 3 parts cold water.
3. Allow the filled Kettle to stand for 1 hour; then bring the Kettle contents to a boil.
4. Empty the Kettle, rinse thoroughly, then repeat this process 1 to 3 times.
5. After decalcifying, rinse the Kettle thoroughly then re-fill with fresh cold water.
6. Bring clean water to a boil 2 or 3 times using cold water to rinse any residual acid taste.
7. Unplug the Kettle power base from the wall outlet.
WARNING:
• To avoid personal injury, always use extreme caution when handling hot water.
• Do not touch any Kettle surface during and after use.
• Never lift the Kettle lid when boiling water.
SO-315596_50020 BRIM Gooseneck kettle IM R1.indd 21
2018-10-24 11:17 AM
