13
Before Using for the First Time
1. Carefully unpack the Kettle and remove all packaging materials
2. Place the power base on a clean, sturdy, level surface.
3. Fill the Kettle to the MAX water level with clean, cold water. Add the lid. Press firmly to make
sure it fits securely.
4. Program the Kettle to boil water following the detailed instructions described in the
“Operating Overview” section of this instruction manual. Discard water and rinse thoroughly.
Repeat 2 or 3 times using cold water to rinse.
IMPORTANT!
If the Kettle is ON without sufficient water, a boil-dry protection device will
automatically turn the unit OFF. (See “Boil-dry Protection” explanation.)
5. Wipe the power base with a damp cloth.
Operating Overview
IMPORTANT!
Always use pure, filtered water for perfect pour over brewing.
1. Place the power base on a clean, sturdy, level surface.
WARNING! The
Gooseneck Kettle may be used ONLY with the power base provided.
The power base may be used ONLY with the
Gooseneck Kettle.
2. Make sure the power base is unplugged.
3. Add at least 1/2 cup cold filtered water to the Kettle; do not fill above the MAX
(3.3 cups /0.8L) water level. Wipe any excess water from the Kettle’s body and power base.
CAUTION:
Do not fill the
Gooseneck Kettle past the MAX water level.
4. Add the lid to the Kettle. Make sure the lid is secure before heating. Place the Kettle
securely onto the heater coils in the center of the power base.
5. Plug the power cord into a 120V AC electrical outlet. ( ) POWER will begin to slowly appear
and then slowly pulse on and off. (See Figure 2, Sleep Mode) When ( ) POWER is pressed,
an audible tone can be heard, and the main menu will appear. (See Figure 3, Main Menu.)
SO-315596_50020 BRIM Gooseneck kettle IM R1.indd 13
2018-10-24 11:17 AM
