14
6. The LCD digital thermometer will display the current water temperature. Press (Temp Set) to
program any of the 6 pre-set target temperatures: 140ºF, 158ºF, 176ºF, 185ºF, 194ºF, 203ºF.
When the desired temperature is displayed, and if (–) MINUS or (+) PLUS is not pressed,
the pre-set temperature will flash 5 times; a tone will sound, and in 4 seconds, the Kettle
will begin to heat. The digital thermometer will revert to the current water temperature
and temps on the digital thermometer will begin to rise. Unless the Keep Warm function
is activated, when the target temperature is reached, a tone will sound and the
Gooseneck Kettle will automatically turn OFF.
7. After pressing (Temp Set), if a precise target temperature is required, press (–) MINUS or
(+) PLUS to adjust the temperature in 1 degree increments. Target temperature settings can
be programmed from 140ºF to 212ºF. When the desired target temperature is displayed,
a tone will sound, the temperature will flash 5 times, another tone will sound and the Kettle
will begin to heat.
8. Press (Keep Warm) to maintain the programmed water temperature for 1 hour.
(Keep Warm) can be pressed at any time, before or after the target temperature has been
programmed. When active, (Keep Warm) will slowly pulse on and off. Press the pulsing
(Keep Warm) at any time to stop the Kettle from heating.
9. Press
(
) BOIL to automatically set the target temperature at 212ºF. A tone will sound,
“212ºF” will flash 5 times, another tone will sound and the Kettle will begin to heat.
NOTE:
If the Kettle is ON and heating without sufficient water, or if water has evaporated,
a boil-dry protection device will automatically turn the unit OFF. (See boil-dry protection
explanation.)
10. Unplug the power base when not in use and before cleaning.
SO-315596_50020 BRIM Gooseneck kettle IM R1.indd 14
2018-10-24 11:17 AM
