manualshive.com logo in svg

brielmaier 282630, Перевод оригинальной инструкции

Поделиться
Скачать
brielmaier 282630 Скачать руководство пользователя страница 24

2 | Safety

Brielmaier Motormäher GmbH

24

Twister

– The owner must clearly regulate and define the persons

responsible for coupling/uncoupling, operation, fault recti-
fication, maintenance and cleaning.

– The owner must make sure that all persons handling the

attachment have read and understood these instructions.
The owner must also train and inform the user of dangers at
regular intervals.

– The owner must provide the necessary protective equipment

to the user and ensure that the necessary protective
equipment is worn.

The owner is also responsible for ensuring that the attachment is
always in good technical condition. The following therefore
applies:

– The owner must ensure that the maintenance intervals

described in these operating instructions are adhered to.

– The owner must check the functionality and integrity of all

safety equipment at regular intervals.

Содержание 282630
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды