brielmaier 282630, Перевод оригинальной инструкции

Страница: 19 / 63

Brielmaier Motormäher GmbH Safety | 2
Twister 19
Hot surfaces
Risk of burns from hot surfaces!
If maintenance work is performed on the attachment following
operation, then there is a risk of burning from contact with hot
surfaces.
– Allow the parts/components on which work is to be
performed to cool down to below 50°C or wear protective
gloves with sufficient thermal insulation.
Danger from pressurised hydraulic lines!
Pressurised lines and machine parts can cause injuries.
– Work on pressurised equipment should only be carried out
by specially trained personnel.
– Before commencing work on the equipment, switch off the
hydraulics, shut off the pressurised supply lines, secure them
against switching back on again and depressurise the
pressurised parts of the system. Pay attention to pressure
accumulators. Also empty these completely.
– Wear personal protective equipment when working on the
hydraulics.
– Do not adjust the pressure settings beyond the maximum
permissible values.
– Use hydraulic hoses that are designed for the system pressure
specified in the technical data only.
– Check hose lines properly for damage before installing them.
Also check the use by date. Do not install damaged or
overaged hose lines.