Bridgeview Manufacturing Inc.
7
PTO Use and Maintenance
Shut
OFF
the tractor engine and remove the key before doing any maintenance on the machine.
Use ONLY genuine
Weasler
parts when replacing any worn or damaged PTO components.
Length:
Confirm the minimum and maximum working lengths of the drive-
line. The telescoping tubes must overlap at least 1/3 of their length
when in use. The PTO is designed to be used with a drawbar length
of 16" from the end of the PTO shaft. Adjust your tractor
accordingly.
Shielding:
Be sure that the shielding is not damaged and rotates
freely on the drive shaft.
Working Angles:
Constant Velocity joints can operate up to 80 degrees for short
periods of time. Do not operate for long periods on sharp angles.
Attachment:
Be sure the drive-line is properly attached and all bolts and screws
are tight on the implement input shaft and on the tractor PTO shaft.
Storage:
When not in use, cover or protect the drive shaft from the weather. When removed from the
machine store both halves together to prevent damage. Check all components for proper
function and lubrication before use.
Содержание BALE KING 8200
