Bridgeview Manufacturing Inc.
20
PTO/Driveline
Frequent lubrication is required. Grease the driveline parts as required on the chart.
After storage
for long periods of time, lubricate and check the function of every
driveline component before operating.
Failure to grease all the joints will
VOID
warranty.
Gearbox
There is one grease zerk on the front of the gear box.
Apply 3-5 pumps of good quality grease every 8 hours
or 150 bales, whichever comes first.
If the gearbox is removed to replace the rotor or
perform any other service, add
80 pumps
of grease to
the grease zerk upon reinstallation.
The gear box requires GL5 80W90 gear oil. The oil should be filled to the level plug and
checked on a regular basis.
Oil change interval
•
25 hours after first use
•
50 hours after first use
•
Every 300 hours or annually (whichever comes first)
Содержание BALE KING 8200
