manualshive.com logo in svg

Bridgeview BALE KING 8200, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Bridgeview BALE KING 8200 Скачать руководство пользователя страница 27

 

 

 

  Bridgeview Manufacturing Inc.

 

24 

Transportation 

 
The Bale King 8200 can be safely towed on public 

roads, provided the following precautions are met: 

•

 

Tow vehicle must be rated for at least 4700 lb 

gross weight, and 1600 lb tongue weight. 

•

 

NEVER exceed 40 km/h (25 mph). 

•

 

ALWAYS ensure that the safety chain is 

properly installed 

•

 

Tow vehicle must have a 7 pin round trailer plug 

•

 

Plug in lights and check for proper function (flashing amber lights, solid red lights) 

•

 

Ensure that the supplied SMV (Slow Moving Vehicle) sign is clearly visible from the rear 

•

 

Lift the forks and wing completely and install the safety locks 

•

 

If possible, the deflector should be in the folded position 

•

 

Ensure that the deflector safety lock is installed 

•

 

Ensure that the PTO and hydraulic hoses are properly secured 

NOTE: With the deflector raised up and folded, and the left side axle extension removed, the 

width of the processor is 8'6".  To maintain stability, never operate the processor without the 

axle extension installed. Check with local authorities regarding transport on public roads. 

Follow all applicable laws and regulations.

Содержание BALE KING 8200
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды