Advice: Have the PS2 and GPS connected when you start up the master (fig 2), as the module is then
powered
-
on and immediately commences searching for the satellites(fig 2)
.
Now connect the RS232 from the GPS –
Module, but not before the above message is displayed be-
cause otherwise this connection will activate the automatic PC
-
communication (fig 3).
Press
< C >
if you want to cancel the operation.
The GPS
-
Module has a red light indicating it
’
s activity.
-
No red light
No power (check the connections)
-
Continuous red light
Module powered but no connection with the satellites.
-
Blinking red light
The module is reading the satellites and is ready for time setting.
Press
< OK >
once the GPS
-
Module is reading the satellites.
The message changes and shows the time after a short while. If it takes too long, repeat the proce-
dure:
Now disconnect the RS232 connection of the GPS –
Module.
Press any button on the keypad of the master to start the printing of the synchronisation sheet.
Red light
Set RTC from GPS
Connect GPS –
Module
GMT
-
UTC correct.: 0
DD/MM/YY
HH:MM:SS
Discon. GPS –
Module
Press any key
BRICON CLUB
-
MASTER
8
